Decal Application Instructions

Decals

Step 1
Clean the area thoroughly. Measure and place the sticker in the desired location. Put a piece of masking tape on the sticker to hold it in place. For best results do not install the sticker in extreme heat or cold.

Step 2
Lift the sticker up and peel the paper backing off the sticker. Be careful not to pull the front masking off.

Step 3
Slowly lower the sticker and rub it in place in a downward motion with a credit card or similar item.

Step 4
Wait a few minutes then slowly peel the clear cover off at an angle. Be very careful not to pull the sticker off the surface. If the sticker pulls away from the surface repeat step 3.

Step 5
Get Salty!

 

Sticker Application

Step 1
Clean the area thoroughly.

Step 2
Remove backing from sticker.

Step 3
Slowly place one side of the sticker onto surface, smoothing out bubbles as you continue to make your way towards the opposite side.

Step 4
Smooth sticker onto surface.

Step 5
Get Salty!